KAWASAKI ZX7R 96-04

Thank you for purchasing this product, we are convinced it will give you complete satisfaction, here are instructions to help you installing the Dussault undertail on your bike, we take for granted that you've worked on a bike before and you've dismantled your bike before, if, for some reasons the instructions below look strange to you don't do it, have a dealer or a friend do it for you, one that did it before of course.

1. Remove :  Seat, grab handles, rear cowling, tail light/bracket, 2 rear foot pegs supports, 2 rear flashers

2. use the pictures as guides to cut the undertray
 

(top view)

side view (left)

side view (right side)

another top view

3. re-install the tail section and insert the undertail to mark the holes support, you need one in the back, aligned with the OEM existing hole, and one on each side, about 2" before the footage supports.

4. remove this nut and install it on the undertail, mark with a pen before drilling.

5. use stainless Phillips screws

6. measure and drill the holes for the license plate bracket.

7. insert the undertail in the tail section, shouldering should match between the 2 pieces.

8. connect the blinkers and License plate light (make sure the polarity +- is respected, LED lights will not work if polarity is not right).

9. re-install the 2 grab handles and the 2 foot pegs brackets.

10. make sure all bolts and nuts are double checked.

11. test, tail lights, brake lights and turn signals.

© Copyright 2008-09 rACK IN MOTION